Blog of Overheadclick.com
Everything All Around The World
Archive for December, 2009
Stabila 03200 Self Leveling Cross Hair Laser Kit
Author: admin7 Dec
Stabila 03200 Self Leveling Cross Hair Laser Kit
Technical Details
- Self Leveling Laser
- Cross hair laser lines
- Vertical, Horizontal lines simaltaniously
- Built in slide operation
- Complete laser kit
Product Description
Amazon.com Product Description
The Stabila Self Leveling Cross Hair Laser Kit features automatic 3-laser beam leveling, and easy 1-person operation for fast and accurate set-ups for horizontal and plumb leveling. The system’s laser has 3-laser diodes for an easy to see vertical line, horizontal line, and horizontal dot at 90-degrees from the vertical line. The included high quality optics deliver a bright round dot and fine lines, and sports a 260-foot indoor operating diameter. Multiple diodes allow you to project horizontal and vertical lines at the same time. The included protective cage not only guards against damage, but also acts as an elevator tripod that allows you to raise and lower the laser approximately 6-inches for fine line adjustment or dot placement. The system also features an easy to open battery compartment and comes with a 2-year limited manufacturer’s warranty.What’s in the Box
Laser, folding ruler/grade stick, target plate, laser glasses, hard shell kit box, batteries, and instruction manual.
Laser, folding ruler/grade stick, target plate, laser glasses, hard shell kit box, batteries, and instruction manual.
Product Description
Bright, sharp, floor to ceiling/wall to wall horizontal and vertical lines with out-of-level alert.. Designed for the carpenter who works 80% interior and 20% exterior. Used for shooting control lines, cabinet installation, wainscoting, new interior wall framing, tile, floor installation, and complicated closets. Bright and crisp laser dot for vertical and horizontal work; laser dot is visible outdoors with target up to 75 feet. Specfications: 4 1/2″ built-in tripod height adjustment range; 360-deg ree line/point rotation range without changing point of reference; jobsite vibration stabilization system; Self Level Range: plus or minus 5 degrees; Laser Line Straightness: plus or minus 0.2 mm-m; plus or minus 1/4″ over 100 ft.; Laser Po
Wii Fit Plus
Author: admin3 Dec
Product Features
Edition: w/ Balance Board
- The Wii Fit Plus Bundle includes the game software and the Wii Balance Board.
- Users can input the amount of time they want to spend on their workouts or select an area for personal improvement, and Wii Fit Plus will suggest a number of diverse activities for them.
- For the first time, users can mix and match which strength and yoga activities they prefer on a given day. The seamless exercise flows make it easier than ever for users to maintain their daily workout routines.
- The range of games and customization options will make players want to play every day. They¿ll be having so much fun that their workouts will seem to fly by in no time at all.
Product Description
Edition: w/ Balance Board
Amazon.com Product Description
Makita LXT601 18-Volt LXT Lithium-Ion Cordless Combo Kit, 6-Piece
Author: admin2 Dec
Makita LXT601 18-Volt LXT Lithium-Ion Cordless Combo Kit, 6-Piece
Technical Details
- LXT lithium-ion battery and optimum charging system produces 430-Percent total lifetime work with 2.5X more cycles
- BHP452 1/2 hammer driver-drill has a new 4-pole motor for 450-Inch/Pound of torque and weights only 3.9-Pound; BGA452 4-1/2-Inch cordless cut/off/angle grinder produces an impressive 10,000 RPM for 50-Percent faster grinding
- BSS611 6-1/2-Inch circular saw has a D35 high torque motor that delivers maximum power for cutting 2X material at 45-Degree and is only 6.9-Pound
- BJR182 Reciprocating saw with tool-less blade change and shoe adjustment at only 8.1-Pound :BTD141 impact driver is 40-Percent more impact ,1,330-Inch/Pound of torque with 0-3,200 IPM and is 3.3-Pound
- BML185 4-Position flashlight with xenon bulbs runs 4.3 hrs; LXT lithium-ion battery provides longer run time, 5X lower self-discharge and 16 firm holding terminals
Product Description
Includes: No.BHP452 LXT 1/2″ 18V hammer drill/driver, No.BTSD141 LXT 1/4″ shank 18V impact driver, No.BJR182 18V reciprocating saw, No.BSS611 6-1/2″ 18V circular saw, No.BGA452 4-1/2″ 18V grinder, No.BML185 18V rechargeable flashlight, side handle, edge g uide, wrench, 2 guards, 1 circular saw blade, 1 reciprocating saw blade, 2 18V Lithium Ion 3.0 Ah batteries, No.DC18RA charger and tool bag. DRILL/DRIVER:450 in/lbs max torqque, 2 speed ranges, 0-400 – 1,500 RPM, 0-6,000 – 22,500 blo ws per minute. 8-3/4″ overall length. 3.9 lbs. tool weight. IMPACT DRIVER: 1/4″ hex shank, 1,330 in/lbs max torque, 0-2,300 RPM. RECIPROCATING SAW: tool-less blade change, tool-less shoe adjustment, 0-2,900 SPM, 1-1/8″ stroke